Art Tech Page 50 Review

RCPlanet

THUNDER TIGER PRO .21BX-R W/SLIDE CARB TTR9475

, Displacement:, 0.213 cu in (3.49cc), Bore:, 0.661" (16.8mm), Stroke:, 0.661" (16.8mm), Practical RPM:, 3,000 - 36,000, Output:, 2.15 HP @ 30,000 rpm, Weight:, 16.23oz (460g), Carburetor Settings, Needle Valve:, 3 - 3-1/2 turns counterclockwise from closed, Mixture Metering Screw:, After setting needle valve, 1/8 turn clockwise if mixture is too rich or 1/8 turn counter-clockwise if mixture is too lean, Height from Mounting Tab Bottom/Top of Cylinder Head:, 3.7" (94.5mm), Height from Crankcase Bottom to Top of Cylinder Head:, 4.2" (108mm), Width at Mounting Tabs:, 1.8" (45.4mm), Width of Crankcase below Mounting Tabs:, 1.2" (31mm), Center of Mounting Holes Same Side:, 0.83" (21mm), Center of Mounting Holes Opposite Side:, 1.4" (36.9mm), Center of Crankcase to Front Bearing:, 1.8" (45.9mm), Distance from Starter to Front Bearing:, 3.3" (84.8mm), Note:, The carburetor is preset from the factory and requires only small adjustments, ,

Designed to achieve the easiest operation and max performance over ...

RCPlanet

THUNDER TIGER PRO .18BX W/ROTARY CARB TTR9442

, Displacement:, 2.97 cc. / 0.181 cu. in., Bore:, 16.20 mm. / 0.638 in., Stroke:, 14.4 mm. / 0.567 in., Practical RPM:, 3,000 ~ 32,000, Output:, 0.80 BHP / 31,000 RPM, Weight:, 248 g. wo/muffler / 8.74 oz., ,

Thunder Tiger PRO series engines are manufactured by automated computer-controlled ...

RCPlanet

THUNDER TIGER PRO .12BK W/ROTARY CARB TTR9459

, Displacement:, .129 cu in (2.11cc), Bore:, 0.545" (13.85mm), Stroke:, 0.551" (14.0mm), Practical RPM:, 3,000 - 30,000, Output:, 0.60 HP @ 29,000 rpm, Weight:, 8.28oz (234g), Carburetor Settings, Needle Valve:, 2-1/2 - 3 turns counterclockwise from closed, Air Bleed Screw:, After setting needle valve, 1/8 turn clockwise if mixture is too rich or 1/8 turn counter-clockwise if mixture is too lean, Height from Mounting Tab Bottom/Top of Cylinder Head:, 2.7" (68.3mm), Height from Crankcase Bottom to Top of Cylinder Head:, 3.1" (80mm), Width at Mounting Tabs:, 1.6" (39.5mm), Width of Crankcase below Mounting Tabs:, 1" (25.4mm), Center of Mounting Holes Same Side:, 0.43" (11mm), Center of Mounting Holes Opposite Side:, 1.2" (32mm), Center of Crankcase to Front Bearing:, 1.3" (34.5mm), Distance from Shaft Starter to Front Bearing:, 2.6" (66mm), Note:, The carburetor is preset from the factory and requires only small adjustments, ,

Thunder Tiger new Pro-12/15/18 are available in several versions with ...

RCPlanet

THUNDER TIGER PHOENIX BXII 2WD 1/10 2.4GHZ IFHSS RED TTR6540-F276

, Vehicle, Length:, 14.68" (373mm), Width:, 9.4" (238mm), Height:, 4.72" (120mm), Ground Clearance:, 1.33" (34mm), Wheelbase:, 10.51" (267mm), Weight:, 3.3lbs (1510g) RTR, ,

Thunder Tiger introduces the PHOENIX BX, and raises the benchmark ...